Sign In | Join Free | My entremaqueros.com
China Dongguan Haida Equipment Co.,LTD logo
Dongguan Haida Equipment Co.,LTD
Dongguan Haida Equipment Co.,LTD
Verified Supplier

11 Years

Home > Plastic Testing Machine >

Electronic Plastic Testing Machine , MFR Plastic Melt Flow Index Testing Instrument

Dongguan Haida Equipment Co.,LTD
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment

Electronic Plastic Testing Machine , MFR Plastic Melt Flow Index Testing Instrument

Place of Origin : Guangdong, China (Mainland)

Brand Name : HAIDA

Certification : ISO 9001:2000; ISO 9001:2008; QS-9000; ISO 14001:2004; CE, , SMC, CMC, CPA, CE,CMA,IMC

Model Number : HD-R804

MOQ : 1 Set

Price : Negotiable

Packaging Details : ach set protected with resin fiber and PP film, then put into Strong wooden case with operation man

Delivery Time : 20 days after order confirmed

Payment Terms : L/C,D/A,D/P,T/T,Western Union,MoneyGram,In cash, escrow

Supply Ability : 300 Sets per Month Haida

power : Electronic

Cylinder : Diameter 9.5504±0.0076mm

Controlling Accuracy : ±0.2°C

Machine Size : (L×W×H) 40×51×60cm

Weight : 42kg (not including the weights)

Timing accuracy : 0.1s

Contact Now

Electronic Plastic Testing Machine , MFR Plastic Melt Flow Index Testing Instrument

Purpose:

Electronic MFR Plastic Melt Flow Index Testing Instrument(also known as melt index meter) was measured under certain conditions thermoplastic melt flow rate of the special equipment. With the determination of melt flow rate MFR, measured melt volume rate MVR, measured melt density ρ, measured melt flow rate ratio FRR and other functions, this machine high precision temperature control, key parts nitriding treatment, high strength and hardness , small deformation accurately measure the flow rate which provides a good condition.

Principle:

Thermoplastic melt flow rate (melt index) is plastic at a temperature and load, the melt every 10 minutes through a standard capillary die quality or melt volume, with MFR (MI) or the MVR value, which can distinguish thermoplastic adhesive in the molten state flow characteristics. For thermoplastics and chemical fiber raw materials, quality assurance of products and other products of great significance.

According to the standard:

Electronic MFR Plastic Melt Flow Index Testing Instrument reference standards: ISO 1133, ASTM D1238, JIS-K72A, GB/T3682, JB/T5456, JJG 878

Application Industry:


Polyethylene, polypropylene, polystyrene
ABS, polyamide, fiber resin
Acrylic, polyoxymethylene, fluoroplastics
Pvc, pvt polycarbonate and other plastic materials

The main technical parameters:

Testing range 0.1-800.00g/10min (MFR); 0.1-800.00 cm3/10min(MVR)
Temperature range Room temperature-400°C
Controlling Accuracy ±0.2°C
Timing accuracy 0.1s
Displacement accuracy 0.01mm
Standard loads 325g, 875g, 960g, 1200g, 1640g, 2500g, 4100, 5000g & 5000g
Combination load 325g, 1200g, 2160g, 3800g, 5000g, 7160g, 10000g, 21600g
Material cutting method Manual, timing and automatic cutting (optional)
Time setting 0.1~999.9min
Cylinder Diameter 9.5504±0.0076mm
Land of piston Diameter 9.4742±0.0076mm, length: 6.35±0.13mm
Thin hole pattern

External diameter: 9.5±0.02mm;

bore diameter 2.0955±0.0051mm; length 8.00±0.025mm

Machine Size (L×W×H) 40×51×60cm
Weight 42kg (not including the weights)
Power AC220V, 50Hz, single phase
Accessory One set computer& software, one tool box, one piece operation video CD and one piece English manual
Design standard ASTM-D1238, ISO 1133

5.Instrument structure

Electronic MFR Plastic Melt Flow Index Testing Instrument consists of a cylinder, the piston rod, die, temperature control system, load, automatic test bodies and automatic cutting and other components. The figure below shows an external view of the product.

1), barrel

Using nitrided steel materials, and after nitriding production, Vickers hardness HV ≥ 700.

2), the rod (rod)

Using nitrided steel materials, and after nitriding production, Vickers hardness HV ≥ 600, the head smaller than the barrel diameter evenly 0.075 ± 0.015mm, top with an insulating sleeve, the rod and load insulation. In the feed rod with two engraved lines 30mm apart as a reference mark, their position is this: When feeding head under the top edge of the die apart 20mm, the tag line coinciding with the barrel mouth flat (see Figure 2).

3), the die

Die Φ2.095 ± 0.005mm, Φ1.180 ± 0.010mm (non-standard configuration) Vickers hardness HV ≥ 700.

4), the temperature control system

The system uses for platinum resistance temperature sensor, AL808 control instruments as a temperature controller, which uses PID control, can automatically compensate for supply voltage fluctuations and ambient temperature influence on the temperature control.

5), the load

Load is the weight and quality of the material and rod assembly. The quality and test load weight distribution tables:

Load

combination weights (g)

325

T-type weight rod assembly

1200

325+875

2160

325+875+960

3800

325+875+960+1640

5000

325+875+960+1640+1200

10000**

325+875+960+1640+1200+2500+2500

12500**

325+875+960+1640+1200+2500+2500+2500

21600**

325+875+960+1640+1200+2500+2500+2500+2500+2500+2500+1600

* Mass rod assembly, the quality of the positioning sleeve is not included.

** The load will be charged with weights.

Electronic Plastic Testing Machine , MFR Plastic Melt Flow Index Testing InstrumentElectronic Plastic Testing Machine , MFR Plastic Melt Flow Index Testing Instrument


Product Tags:

universal tensile testing machine

      

compressive strength testing machine

      
 Electronic Plastic Testing Machine , MFR Plastic Melt Flow Index Testing Instrument Manufactures

Electronic Plastic Testing Machine , MFR Plastic Melt Flow Index Testing Instrument Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: Dongguan Haida Equipment Co.,LTD
*Subject:
*Message:
Characters Remaining: (0/3000)
 

Friendly Links: www.everychina.com

Home| Products| Suppliers| Quality Suppliers| Site Map |About Us |Contact Us |Help |关于我们 |联系我们

Copyright © 2009 - 2024 entremaqueros.com. All rights reserved.